Blog

Tiles Philippines: The Best Ways to Remove Tough Grout Stains

What are the best ways to remove tough grout stains?

  1. Spray with warm water
  2. Apply a baking soda paste
  3. Use oxygenated bleach
  4. Resort to steam cleaning

 

 

There are a lot of things in the world that is quick to get dirty but challenging to clean. Among them, the one most of us have had the displeasure of dealing with is grout. While it is an important part of the installation of floor tiles in the Philippines and provides additional aesthetic appeal to our interiors, it is also a huge pain to deal with. This is especially true when it starts to get grimy, dirty, and stained, which often happens in a surprisingly short amount of time.

Grout is highly porous and absorbent, and these properties are what makes it so easy to stain. Any kind of filth, particularly in liquid form, seeps into and gets trapped in the material. Over time, grime builds up and makes it look less pearly and more stained and grubby. The worst part about this is that it’s almost impossible to clean with a simple scrubbing. Since the grime is so integrated into the material, you really can’t just wipe it off.

Still, there’s no need to panic as there are ways to bring life back to your grout. We’ve listed the best ways to remove tough grout stains below, so just pick the ones that you think will work best for you!

 

 

Spray with Warm Water

Spray with Warm Water

Whenever homeowners see stained grout in their home, their initial reaction is to spray it with different kinds of chemicals and brush until they tire themselves out. Not many will try to remove the dirt with the simplest materials, but often times they’re sufficiently effective.

So before you take out the abrasives, it’s best to start with a bottle of plain, warm water, and a stiff-bristled brush or one specifically designed for cleaning grout. Spray the grout lines with a generous amount of warm water, scrub in circular motions, and then let dry.

 

 

Apply a Baking Soda Paste

Mixing three parts baking soda to one part water makes a thick paste that works well with grout of any color or type.

The application process is easy: simply apply the thick paste onto the grout lines. You will know that the cleaning process is underway once the materials start bubbling. After the bubbling reaction is done, which should take a few minutes, you can then scrub the grout lines with a brush and then mop your floor to remove any residue.

 

 

Oxygen Bleach (Source - Popsugar)

(Source: Popsugar)

Use Oxygenated Bleach

If you tried the first two and they still aren’t enough, then it’s time to bring out the strong abrasives and chemicals to clean your heavily-stained grout. Grab a bottle of oxygenated bleach and dissolve 2 tablespoons of the powder in 2 cups of water. It is important to make this immediately prior to use in order to achieve the best results.

Once thoroughly mixed and the bleach is activated, test it out in a hidden corner of your floor before applying anywhere else. The reason for this is because oxygenated bleach can damage some grout and tiles, so it’s better to ensure that yours doesn’t get ruined. After the solution is prepared, pour it onto your grout lines, but not all at once to avoid working with a completely wet floor. Like with the other paste and solutions, scrub rigorously and mop afterward.

 

 

Resort to Steam Cleaning

Steam cleaners are the most effective against the toughest grout stains and they’re also the safest material to use because they can effectively clean and sanitize all tile and grout types. They are also very easy to use and all you have to do is read the instructions indicated in the product. After you’ve run the steam cleaner over your floor, make sure to wipe or mop off any remaining moisture.

The only downside with using this device is that it may remove grout sealant and loosen your tiles, so only use it if you have unsealed grout or are ready to remove/replace old sealant. Other than that, it is the most effective and most environmentally friendly way to remove tough grout stains.

 

 

Key Takeaway

There’s no need to get frustrated over heavily-stained grout as there are a number of ways to return them to their former glory. For all you know, a simple spray and soak in warm water is enough to do the job. If not, then maybe a baking soda paste or an oxygenated bleach solution. If those still don’t work, then you can guarantee that a steam cleaner will get the job done. Using any of these four methods should help you with your grout problem, and soon, your tiles in the Philippines will be looking good as new!